Alright... I need some opinions here.
When you are walking down/up stairs that will lead you to different floors (B1, 1F, 2F etc) while holding Left+Right+Up the amination will enter EG (The glitch that's used in the glitched run where you can walk through walls and such). And once you reach the next floor you will be invisible until you leave the room.
However, I later noticed that the position of Link wasn't the same as it usually is. Link is both lower down on the screen and some more to the left or right. It's not the same with all stairs.
In this movie, when I'm walking down the stairs normally, Link will be standing at position: x 249 and y 821
When holding up+left+right: x 236 and y 83
When going up the stairs normally: x 248 and y 100
When holding up+left+right: x 248 and y 125. 25 pixels lower down.
I can still start moving around at the same frame in both cases
http://65.93.197.203/microstorage.php/info/167354858/StairsGlitch.smv
x position 7E0022, 1u
y position 7E0020, 1u
I want to know if I shall:
1. Restart the run and include this trick.
2. Start using it from now on and continue.
3. Don't care about it at all.
I hope my bad explanation was somewhat understandable...