Post subject: Hello, I'm tall
Player (156)
Joined: 2/4/2011
Posts: 61
Hi, everybody. I'm tall--long-time lurker, first time poster. I'm a Super Meat Boy speed runner. I want to be on the ground floor to TAS it when it comes out on Wii (still speculation at this point), and when Dolphin gets to the point of being acceptable for publications. So I'm going to start practicing. See you around.
Editor, Skilled player (1440)
Joined: 3/31/2010
Posts: 2109
Lo and welcome to TASvideos, tall, enjoy your stay! I'd be all for a Super Meat Boy run, so once Dolphin gets accepted, by all means, go for it
Skilled player (1652)
Joined: 11/15/2004
Posts: 2202
Location: Killjoy
Hi, I'm 6'3"!
Sage advice from a friend of Jim: So put your tinfoil hat back in the closet, open your eyes to the truth, and realize that the government is in fact causing austismal cancer with it's 9/11 fluoride vaccinations of your water supply.
Joined: 5/14/2007
Posts: 525
Location: Pisces-Cetus filament
Hello. I'm tall as well! >_> Jokes aside, welcome to TASVideos! You could TAS something else in the meantime. :P
AzumaK wrote: I swear my 1 year old daughter's favorite TASVideo is your R4MI run :3 xxNKxx wrote: ok thanks handsome feos :D Help improving TASVideos!
Player (156)
Joined: 2/4/2011
Posts: 61
You think that's tall? I bet strangers don't even ask you if you play basketball. You've got to be at least 6' 4" before I consider you tall. XD Anyway, I started my first practice TAS tonight. I'm catching the fever. Counting frames and beating my own time is exciting. There's even an unpublished WIP of the game I'm doing ... and so far I'm kicking its butt. I have one question about rerecording logistics. Let's say I run Level 1, move on and run Level 2. Then I realize a better way to do Level 1. How do I rerun Level 1 and tack on my existing Level 2 run? In this case, I'm on SNES9x, 1.51 v6 svn 113. I was wondering this going in, and now I'm in the situation where I need to know!
Joined: 7/2/2007
Posts: 3960
You can't always tack on level 2 to a modified level 1 run. The problem is that your new level 1 might change internal state (especially things like the state of the random number generator) which would cause the input you created for level 2 to no longer mesh with what the level is doing. That causes desynchs. Sometimes you can fix that with a little patching though, e.g. if the only change was that an enemy that you used to jump over now needs to be killed en-route instead. And sometimes things synch perfectly with no modifications needed. Depends on the game. Anyway, I think what you're looking for is called TAS Movie Editor. You can also accomplish this by using a hex editor to modify the movie file directly, if you really know what you're doing. (Also, I'm 6'5")
Pyrel - an open-source rewrite of the Angband roguelike game in Python.
Skilled player (1652)
Joined: 11/15/2004
Posts: 2202
Location: Killjoy
tall wrote:
You think that's tall? I bet strangers don't even ask you if you play basketball. You've got to be at least 6' 4" before I consider you tall. XD Anyway, I started my first practice TAS tonight. I'm catching the fever. Counting frames and beating my own time is exciting. There's even an unpublished WIP of the game I'm doing ... and so far I'm kicking its butt. I have one question about rerecording logistics. Let's say I run Level 1, move on and run Level 2. Then I realize a better way to do Level 1. How do I rerun Level 1 and tack on my existing Level 2 run? In this case, I'm on SNES9x, 1.51 v6 svn 113. I was wondering this going in, and now I'm in the situation where I need to know!
People ask me to play basketball all the time. Just yesterday, I was in the grocery store, and someone asked me to join a pick up game in the frozen foods aisle! Of course, I had already made my way through that aisle and stocked up on frozen pizzas, so I had to decline. Your question totally depends on the game. Some games allow you to hex edit your input from a previous level into the movie. However, if the game has things such as randomness, the occurrences that happen in level 2 may not be the same! Since you are only in level 2, I'd start back, and improve your level 1. Who knows, you may find improvements to level 2 by redoing it!
Sage advice from a friend of Jim: So put your tinfoil hat back in the closet, open your eyes to the truth, and realize that the government is in fact causing austismal cancer with it's 9/11 fluoride vaccinations of your water supply.
Player (156)
Joined: 2/4/2011
Posts: 61
Excellent. I will use the Movie Editor next time I work on it. I think it should be fine in this case.
Player (156)
Joined: 2/4/2011
Posts: 61
Well Movie Editor didn't work for me. There's a note that it only works with snes9x 1.43, and mine is different. This time it wasn't so bad to redo both stages. Now I've got my first complicated task. After each of these first 2 stages is a bonus stage. There are about 3 it chooses from. I need a specific one after the 2nd stage, or else I'll have to spend extra time on the 3rd stage. So I got to figure out how it determines what bonus stage comes up. I know the preferred order is possible. I seened it. I'm sorry for being vague; I'd just rather not reveal what game yet. Still, how do TASers usually approach this type of challenge?
Joined: 7/2/2007
Posts: 3960
Most likely the choice of bonus stage is "random" -- that is, it depends on the state of the random number generator (RNG). This is a number that's stored in memory somewhere and gets updated when needed. Usually you'll get either one update per frame, or one update per random number request, or the two combined. Thus you may get different results simply by waiting (or by going faster). Or you may have to trigger a source of randomness to advance the RNG; how to do this depends on the game but could include things like letting an enemy move around, creating particle effects, causing a damage calculation to be perfomed, etc. If you know where things are in memory for your game, you can look up the RNG state and monitor it so you know when it's updated. You can also try forcing it to different values using cheats, to see what values will get you the result you want. This can save on trial and error. For example, if you know that a rare item only drops if the RNG is less than 256, then instead of trying to kill an enemy on every RNG state you get, you can just wait for the correct one. This was necessary for the Aria of Sorrow all-souls run.
Pyrel - an open-source rewrite of the Angband roguelike game in Python.
Player (156)
Joined: 2/4/2011
Posts: 61
Oh, yeah. RAM search makes me feel like a boss. I didn't quite find a RNG, per se, but I found a frame counter, and learned that the game alternates bonus stages in the pattern "A-A-B-C" on a per frame basis. Thanks, derakon. Things are looking up. I suspect it may keep you from playing the same bonus stage twice in a row, so I'll test that out. I also learned that resetting between levels will save at least 1152 frames (19.2 seconds) over the course of the run if I make it to the end.
Player (156)
Joined: 2/4/2011
Posts: 61
As of now, I'm mostly done with the TAS. I'm going to go back and refine one of the levels where I slacked off some, and hex out a few missed shots, but that's basically it. I'm encountering a new problem at the end. I am hexing out frames trying to get input to end as early as possible. But every time I truncate the file, edit the frame count, and play the movie, it adds on a bunch of empty frames to my file (but keeps the frame count the same). Any idea why it's doing that? Will the site measure length by my frame count? Thinking out loud: ... maybe they're not empty frames, but rather just 0'd out bytes. Is it just an alignment issue?
Skilled player (1652)
Joined: 11/15/2004
Posts: 2202
Location: Killjoy
make a savestate on the final frame. Switch to read-write. pause Load that state. Stop movie. Movie corrected!
Sage advice from a friend of Jim: So put your tinfoil hat back in the closet, open your eyes to the truth, and realize that the government is in fact causing austismal cancer with it's 9/11 fluoride vaccinations of your water supply.
Player (156)
Joined: 2/4/2011
Posts: 61
OK. That seems only to work if I replicate at least one frame of input in the emulator; otherwise it disregards the change. Now I am totally done with my first TAS. That level where I slacked off had more room for improvement than I thought. Now it's much more optimized. I'll submit it this weekend.
Player (156)
Joined: 2/4/2011
Posts: 61
tall wrote:
I'm a Super Meat Boy speed runner. I want to be on the ground floor to TAS it when it comes out on Wii (still speculation at this point), and when Dolphin gets to the point of being acceptable for publications.
Oddly enough within days of submitting my first TAS (#3022: tall's SNES Pilotwings in 20:08.97), it became official that Super Meat Boy is not coming to the Wii at all. They said for a month that they had an announcement about the Wii version yesterday, and I thought certainly that the announcement would not be "It doesn't exist." Yet there it is. Regardless, I'm going to continue TASing. I got the other part of my wish, in that Dolphin development seems to be coming right along. I'll potentially need to upgrade my computer to run games at full speed, but that is still relevant to my interests. So I'm open to suggestions for my next game. I want to stick with 2D for this one, probably SNES. As far as personal preference, I didn't play many SNES games (that don't already have untouchable runs). Here's some from the List of ideas: * Arkanoid - Doh It Again * Cybernator * Dragon's Lair * Equinox (the sequel to Solstice) * Motocross Challenge * Uniracers o 100% Complete * Warlock * Ys III - Wanderers from Ys One from the DS list caught my eye. N+ is not unlike Super Meat Boy. I played it on Xbox, and it wasn't really my bag. But I could see how it would make a good TAS. It would also serve me well to get familiar with different emulators. I am a big fan of Puzzle Quest. A run of that for the DS would be a huge undertaking, though. I'm not sure I'm ready for an RPG or Puzzle game, let alone a hybrid of both. Maybe some day. One last newbie question. This forum seems to be relatively inactive compared to the number of submissions, and the amount of work that goes into each. Is the IRC the place to be?
Joined: 7/2/2007
Posts: 3960
A few other suggestions for SNES games you might try TASing: * Cool Spot * Joe & Mac * Magic Sword (probably want the arcade version though) * Super Turrican 2 * Aleste Aleste is a scrolling shmup, but if you get the Japanese version there's a code to unlock a much harder mode where the enemies fire bullets on death; it could be frantic enough to be interesting. Personally I'd find it more interesting than Arkanoid. Recca (for the NES) could be good for similar reasons. It's a serious challenge to kill everything in that game even with rerecords. Puzzle Quest would involve a lot of luck manipulation. I wouldn't undertake that unless you're willing to learn the ins and outs of lua and memory watching. Good luck with your next TAS!
Pyrel - an open-source rewrite of the Angband roguelike game in Python.
Joined: 7/28/2005
Posts: 339
IRC is definitely the place to be. There's pretty much always some discussion going on, unless it's the dead of night (and sometimes even then).
Experienced player (829)
Joined: 11/18/2006
Posts: 2426
Location: Back where I belong
Derakon wrote:
A few other suggestions for SNES games you might try TASing: * Joe & Mac
Not a good idea. My very first experience and submission was this game, and it's just way too slow and bland to do too much, even with controlling two players.
Living Well Is The Best Revenge My Personal Page
Player (184)
Joined: 12/24/2010
Posts: 144
Location: Brazil
tall wrote:
tall wrote:
* Dragon's Lair
I got a WIP of this game at the snes thread, if want to take a look maybe we can do it together if you feel interested on this game. This one should be a nice contribution to expand it title since there is a NES version already and the SNES version isnt so bad, so its seem a good ideia .
My main objective here is to TAS the most obscure games titles!
Joined: 11/22/2004
Posts: 1468
Location: Rotterdam, The Netherlands
Unfortunately, I'm only 5"10.
Joined: 8/7/2006
Posts: 344
I'm 6'5". Am I also tall? Unfortunately I don't play basketball nor am I very good at it. Welcome!
Player (156)
Joined: 2/4/2011
Posts: 61
Lua Scripting. What is the deal? Everything in the gui is a frame behind. I try to see how far I travel per frame. Say on frame 0, X = 100. On frame 1, X = 112. I can see that, but my GUI says "Distance: 0." Wrong! On frame 2, X = 136. gui says "Distance: 12." ... Good, but i wanted that last frame. What's up with this? I've tried registerbefore an registerafter.
Player (146)
Joined: 7/16/2009
Posts: 686
registerbefore and registerafter shouldn't even be necessary. Also, what does your code look like, for what emulator and for what game? People need specifics to help you.
Player (156)
Joined: 2/4/2011
Posts: 61
local x, xprev = 0

function distance()
  xprev = x
  x = memory.readword(0x7E0522)
  
  gui.text(200, 150, "Distance: " .. x - xprev)
end

emu.registerafter(distance)
Also did while-true-do loop. Snes9x
Player (146)
Joined: 7/16/2009
Posts: 686
local x = 0
local xprev = 0

while true do
    xprev = x
    x = memory.readword(0x7E0522)
 
    gui.text(200, 150, "Distance: " .. x - xprev)

    emu.frameadvance()
end
Is how I would've done it. I have never used registerbefore and registerafter, so I couldn't say for the life of me what is wrong with your code.