Posts for RaXx

Experienced Forum User
Joined: 10/5/2021
Posts: 13
I tried to use the Lua scripts from user mtvf1, but I think they don't work with the most recent version of bizhawk, Even so, I did this TAS in 1P mode demonstrating the location of maximum possibles POWs in record time, (I think). I hope you like it. Link to video
Experienced Forum User
Joined: 10/5/2021
Posts: 13
CasualPokePlayer wrote:
You'd just have to start from SaveRAM after doing your test menu changes. Do File > Movie > Record Movie... then pick the "from SaveRAM" start option, then open TAStudio.
Excellent, after following these last steps, it started without problems or errors, with the difficulty changed and all the changes saved, thank you very much. Now to create TAS as if there were no tomorrow. Edit: I think this will not be an acceptable submission since I am starting from a Sram, right ?
Experienced Forum User
Joined: 10/5/2021
Posts: 13
CasualPokePlayer wrote:
You have to edit the DIP switches when outside of a movie, then you can create a new movie with those DIP switch edits. Loading a movie will just load that movies sync settings, overwriting whatever sync settings you currently have.
Link to video I uploaded a video with all the steps I do to create a new project, maybe I'm doing something wrong...
Experienced Forum User
Joined: 10/5/2021
Posts: 13
CasualPokePlayer wrote:
It's a DIP switch, you go to Arcade -> Settings for those.
Every time I start a new project in tastudio, all the changes I make in "Arcade -> Settings" are not recognized, they are discarded completely. I think that the midway boards are different from the cps1/2 or mvs ones, in those, tastudio does have the button that I mentioned before, I mean that it has 2 "service" buttons, one for the credits and another for the configurations. I think I will leave the MK TAS in Bizhawk pending for now, I will focus on libtas with MAME.
Experienced Forum User
Joined: 10/5/2021
Posts: 13
CasualPokePlayer wrote:
Are you able to enter into this "test mode" in regular MAME.
Yes, in the latest version of MAME I entered the test menu without any problem, just pressing the F2 key.
Experienced Forum User
Joined: 10/5/2021
Posts: 13
feos wrote:
RaXx wrote:
it is possible to add the test/service menu button for these boards (mk1-mk3) on Tastudio ?
Ok yes, but with that button it only lets me add coins/credits, it doesn't let me enter the test mode to change the difficulty and the other settings
Experienced Forum User
Joined: 10/5/2021
Posts: 13
feos wrote:
RaXx wrote:
Mortal Kombat rev. 5.0 Mortal Kombat II rev. 3.1 Ultimate Mortal Kombat 3 rev. 1.2 In these versions the buttons are not mapped, "!" appears in the inputs.
Fixed on github.
I just did tests and everything was perfect, thank you very much, one last question, it is possible to add the test/service menu button for these boards (mk1-mk3) on Tastudio ? In cps1, cps2 and mvs games it is already added, but in the mk ones there is a service button but just add coins, thanks in advance.
Experienced Forum User
Joined: 10/5/2021
Posts: 13
CasualPokePlayer wrote:
If they do not work in regular MAME then it will not and never will work in BizHawk's MAME. If you really want to TAS those games, use libTAS + that custom MAME version.
Yes, I think I will have to use LibTas, now I just need to install a virtual machine.
Experienced Forum User
Joined: 10/5/2021
Posts: 13
feos wrote:
RaXx wrote:
Also the plus versions of these roms do not load at all, I don't know if this is where we should talk about this.
Do they work in regular MAME?
No, it doesn't work, only in the MAME+ version of the page: https://mkombat.plus/mame/ only in this version have I managed to run it. I tried the Original/Regular version of MAME, but It gives me a checksum error in only 2 roms: UG12 and UJ12.
Experienced Forum User
Joined: 10/5/2021
Posts: 13
Mortal Kombat rev. 5.0 Mortal Kombat II rev. 3.1 Ultimate Mortal Kombat 3 rev. 1.2 In these versions the buttons are not mapped, "!" appears in the inputs. I`m using the lattest interim version and also the 2.9.1 version in both happens the same Also the plus versions of these roms do not load at all, I don't know if this is where we should talk about this.
Experienced Forum User
Joined: 10/5/2021
Posts: 13
https://youtube.com/@Swordless_RaXx TASes, Shorts and Tutorials
Experienced Forum User
Joined: 10/5/2021
Posts: 13
I know it's a little (too) late, but I'm publishing it so that some expert maybe can improve the times, the route I think is the most optimal but maybe there is another one, the times of the bosses can also be improved and in many rooms too, I leave the .bk2 file and the link to my YT channel where the video is located. Metroid Super Zero Mission v2.4 "Hard Edition" 100% .bk2 file: https://tasvideos.org/UserFiles/Info/638078873034279052 YT. Video: Link to video
Experienced Forum User
Joined: 10/5/2021
Posts: 13
I have a problem with the svc chaos rom, every time I want to enter an input in the buttons all the lines are completely filled,(the old release (2.8) works fine), maybe NEO-GEO is not 100% compatible