Game Objectives

• Emulator used: Mupen64 0.5 Re-Recording v8
• Aims for fastest time
• Uses game-breaking glitches

Comments

Tricks Used in this Run

0-Input BLJ

When you have no input on the analog in between the "A" button presses for a BLJ, your speed will not decrease, thus exponentially increasing the speed at the end result of the BLJs.

Pause BLJ

Normally, you can only press the "A" button fifteen times per second because the game runs at thirty frames per second. If you had thirty continuous "A" frames, you'd just be holding "A" down, not tapping it. However, if you pause while pressing the "A" button, you are given an opportunity on the next frame to release the "A" button. You can follow that by repressing it when it's not paused (therefore letting you BLJ the equivalent of thirty times "per second"). This is useful when you need more speed to travel a long distance. It isn't as helpful as it seems as it takes three extra frames to do a Pause BLJ. In order to save time you need the extra speed to save at least 3 frames.

Forward Jump Kick Trick

While Mario is recovering after a forward movement (dive, long jump, etc.), you can hold the "A" button prior to landing, and on the frame you land, press the "B" button with the analog stick at ^54 or less (on the TAS Input Plugin), you will do a jump kick. The trick is that it maintains all of the same speed from before the landing. You can also apply this when moving backwards (such as after a BLJ), by holding "A" before you are in the running animation, and then pressing "B." This causes Mario to do a jump kick and retain the same speed. This is useful for crossing long gaps and covering large distances.

Slide Kicking

This has been found to be the best method of forward movement over a long distance, because unlike the jump kick, you can do it repeatedly without losing speed.

Punch Trick

Instead of running for one frame when accelerating from a stop, you press the "B" button with no analog input, which gives you a starting speed of 10 instead of roughly 8.

Forward Speed Conversion

After triggering text, Mario is in a frozen state with his speed stuck at what it was while activating the text. When the text is read, you have the ability to do many things. One trick we can do with this is to press "C^" (upper C button) and "Z" at the same frame and hold a specific direction to get forward speed (as opposed to backwards speed which we originally used to activate the text). This is useful because forward speed can be used for things like getting to high places, such as the endless stair case. If you don‘t use Z with C^, your options are limited, because you only move forwards or backwards in a state that will not let Mario jump.

Instant Jump Kick Trick

This trick allows you to jump kick on the very first frame that Mario has input. This also is enables you to choose an angle for Mario to travel. You do this by holding A for at least one frame before Mario can move, then push B and the direction you want to go on the first frame of input.

Hyper-Speed Wall Kicking (HSWK)

Mario's speed increases infinitely while airborne with the analog held forward. If he wallkicks on the first possible frame, he doesn't lose any speed.

Glitchy Wall Kick (GWK)

If you combine certain Mario angles with certain wall angles, sometimes you can make Mario kick off of a wall in the opposite direction that he's supposed to.

Improvement Table

Special Thanks

Suggested Screenshot